THERMAL FLOW SENSOR TA DI EX-D / ATEX
āļĢāļŦāļąāļŠāļŠāļīāļāļāđāļē : TA DI EX-D / ATEX
| āļĢāļēāļāļē |
0.00 āļŋ |
| āļāļģāļāļ§āļāļāļĩāđāļāļ°āļāļ·āđāļ | |
| āļĢāļēāļāļēāļĢāļ§āļĄ | 0.00 āļŋ |
āļŠāļīāļāļāđāļēāđāļĄāđāđāļāļĩāļĒāļāļāļ
āļŠāļīāļāļāđāļēāļŦāļĄāļ
THERMAL FLOW SENSOR TA DI EX-D / ATEX - STANDARD - WITH INTEGRATED TRANSDUCER
Measuring tube TA Di with inside diameter 16, 21.6, 27.2, 35.9 and 41.8 mm and transducer UTA in Ex-d connection housing.
Material: stainless steel.
Suitable for fixed measuring of standard flow rate NV/t [mÂģ/h], mass flow rate [kg/h], standard volume NV [mÂģ] and standard flow velocity Nv [m/s] in clean, condensate and particle-free gases.
Output signals:
- 4-20 mA (flow-proportional)
- quantity pulse / limit value
- HART communication
Configurable via HART communication with HART modem adapter and PC software UCOM.
MEASURING RANGE
- 2.4 ... 12.350 l /min or 0.15 ... 741 mÂģ/h
PRESSURE RESISTANCE
- up to 16 bar / 1.6 MPa g.
MEDIA TEMPERATURE
- -10 ... +140 °C
MEDIA
- air, (compressed air), nitrogen, oxygen, methane, natural gas, argon, hydrogen, propane, butane, carbon dioxide, helium, sulphur hexaflouride
DISPLAYED INDICATORS
- standard flow rate [mÂģ/h] or [l/min], standard volume [mÂģ],
- standard flow velocity [m/s]
IP PROTECTION TYPE
- IP68 (connection housing)
TYPE OF PROTECTION
- ATEX category 1/2G and category 1/2D (zone 0/1, zone 20/21)
SENSOR OUTPUT
- analog output 4 ... 20 mA standard flow rate/mass flow; relay for quantity measurement or limit value, HART communication
-
Insertion Thermal Mass Flow Sensor TA200.00 āļŋ
-
āđāļāļāđāļāļāļĢāđāļ§āļąāļāļāļąāļāļĢāļēāļāļēāļĢāđāļŦāļĨāļāļāļāđāļāđāļŠ TA10/15 EX-D Thermal Flow Sensor0.00 āļŋ
-
āđāļāļĢāļ·āđāļāļāļ§āļąāļāļāļąāļāļĢāļēāļāļēāļĢāđāļŦāļĨāļāļāļāđāļāđāļŠ TGF600 Thermal Mass Flowmeters0.00 āļŋ
-
MT100 Series Multipoint Thermal Mass Flow Meters0.00 āļŋ
